Sold Out
Leave us your email address and we will notify you when the product is back in stock.
B600 Video Bar
(Optional) Join our Anker email list to get special offers and more.
Always Be Heard
Get Stunning Audio
Show True-to-Life Video
Look Like Magic
is Everywhere
Our special noise cancelling technology simultaneously amplifies your voice with a 4-mic array while quieting background noises.
Show up for every meeting looking your best in 2K resolution and stay the center of your camera’s attention with solo frame.
Resolution
Solo Frame
Automatically balance color temperature and brightness in dim rooms so you stand out.
Get the most out of your AnkerWork B600 and download the AnkerWork software. Manually change features such as resolution, field of view, lighting, and more.
FOV
Resolution
Lighting
2K
Up to 30 fps
1/2.8 Inches
Smart Auto Exposure
Smart Color Enhance
Solo Frame
Smart Auto Focus
Color Temperature
Brightness Level Control
4-Mic Array
2 𝗑 2W
Keeps voices at the same level up to 2 m away
Auto Echo Cancellation
Smart Noise Cancellation
2 𝗑 USB-C (data and charging)
Y
Option A:
On Top of Your Monitor
Unfold the clip so it fits over the top of your monitor. To secure the clip, press it against the back of your device.
Adjust the video bar up or down, or rotate it to your preferred position.
If the joint between the video bar and the clip is not tight enough, tighten the screw with the built-in handle at the base or a flathead screwdriver (not included).
Option B:
On a Tripod on Your Desk
With the clip folded in, mount the video bar onto a tripod (not included) with a ¼ inch thread.
Note:
We recommend installing the AnkerWork B600 on your monitor. If you are using a laptop, we recommend using a tripod for a more secure installation.
1. Connect the video bar to a computer using the provided USB-C to USB-C cable (or other Anker USB-C to USB-C cables with a length of less than 2 m and a transfer speed of 480 mbps).
2. Connect the video bar to a power supply using the provided power adapter (or a USB wall charger with an output of at least 5 V / 2 A).
3. Open the software you want to use with the video bar. The LED indicator will turn blue when the communication software (such as Zoom) is using its microphone or camera.
Note:
1. The USB-A port can only support Anker's wireless headphones (such as the PowerConf H700) with a USB receiver. You can pair your headphones with the video bar for the best experience.
2. The LED indicator will flash red if the power adapter is connected to the data port by mistake.
1. Align the groove of the plug with the pins on the power adapter.
2. Press and turn the plug clockwise to lock.
3. To remove the plug, turn it counterclockwise while pressing the push button.
Note: A general USB wall charger with an output of at least 5V / 2A can also be used to power AnkerWork B600.
When both data and power cables are correctly connected:
- blue means the microphone or camera is in use;
- red means the microphone is muted.
Flashing red means the data and power cables are plugged into the wrong ports.
There are no LED prompts when only the power cable is connected.
- Mute / unmute the microphone by pressing the button on the left side.
- Turn the edge light on / off by pressing the button on the right side. You can also rotate the edge light 135° or wider to turn on the light.
- Slide the brightness bar to adjust brightness.
No, AnkerWork B600 does not currently support Bluetooth.
Please download the software from this link: https://us.ankerwork.com/pages/download-software
1. Update the webcam's firmware by going to Device Switch on the left top corner > Select Device > Device > Inspection Update.
2. View the webcam's FAQ and get in contact with technical support by clicking the question mark.
3. Go to Customizable Mode to adjust the settings according to your preference.
4. Adjust the brightness and color temperature, turn on / off the light, and enable automatic light adjustment.
No, the AnkerWork software does not currently support virtual background settings. However, you can set virtual backgrounds via a third-party software that supports this feature.
The edge light can enhance the brightness of your face in dark environments, making you appear brighter and more professional on video calls.
To turn on the edge light, position it to an angle of 135° or wider. You can also activate the edge light via the AnkerWork software.
Adjust the brightness by sliding the brightness bar on the edge light, or adjust it on the AnkerWork software.
Using the AnkerWork software, you can also adjust the brightness and color temperature or enable automatic light adjustment.
No, AnkerWork B600 only supports 30 fps. The frame rate will be affected by third-party softwares and network bandwidth, but the camera will auto-adjust to ensure the frame rate remains constant.
1. AnkerWork B600 has both auto exposure and auto white balancing functions, which together, automatically correct the brightness according to the environment.
2. The edge light function can be turned on to enhance the brightness of your face in dark situations.
3. The edge light has an auto light adjustment function, which allows the edge light to recognize the brightness level on human faces and automatically adapt.
We recommend turning on the edge light when light conditions are below 30 lux. When using AnkerWork B600 in situations with bright light, the auto exposure and white balancing features are powerful enough to ensure proper brightness is used, but will not make your image overly bright.
When AnkerWork B600 is connected to a third-party conferencing software, the quality of the video image may be affected.
For example, the maximum resolution for Zoom is 720p and 360p for Microsoft Teams. AnkerWork B600 will only display image quality in 720p and 360p,
respectively, despite it being capable of supporting up to 2K resolution.
The quality of the video image can also be influenced by the network bandwidth and processing mechanisms used by third-party software.
Due to the limitations of the USB (UVC) protocol, only one video stream is supported at a time. Make sure that the AnkerWork software is closed when you use AnkerWork B600 with a third-party software.
Improve your microphone's vocal pickup ability by speaking within 3 m of the product and regularly updating the firmware. It is also recommended that you use personal workstations, rather than meeting rooms.
Yes, AnkerWork B600 has two, 2W built-in speakers. Keep the firmware updated to get the best audio results.
No, AnkerWork B600 does not currently support Windows Hello.
For a business quote, please contact us at support@ankerwork.com. Our team will reply in 24 hours.
2K
Up to 30 fps
5 MP
1/2.8 Inches
Smart Auto Exposure
Smart Color Enhance
Solo Frame
Smart Auto Focus
Color Temperature
Brightness Level Control
4-Mic Array
2 𝗑 2W
Keeps voices at the same level up to 2 m away
Auto Echo Cancellation
Smart Noise Cancellation
2 𝗑 USB-C (data and charging)
Y
Option A:
On Top of Your Monitor
Unfold the clip so it fits over the top of your monitor. To secure the clip, press it against the back of your device.
Adjust the video bar up or down, or rotate it to your preferred position.
If the joint between the video bar and the clip is not tight enough, tighten the screw with the built-in handle at the base or a flathead screwdriver (not included).
Option B:
On a Tripod on Your Desk
With the clip folded in, mount the video bar onto a tripod (not included) with a ¼ inch thread.
Note:
We recommend installing the AnkerWork B600 on your monitor. If you are using a laptop, we recommend using a tripod for a more secure installation.
1. Connect the video bar to a computer using the provided USB-C to USB-C cable (or other Anker USB-C to USB-C cables with a length of less than 2 m and a transfer speed of 480 mbps).
2. Connect the video bar to a power supply using the provided power adapter (or a USB wall charger with an output of at least 5 V / 2 A).
3. Open the software you want to use with the video bar. The LED indicator will turn blue when the communication software (such as Zoom) is using its microphone or camera.
Note:
1. The USB-A port can only support Anker's wireless headphones (such as the PowerConf H700) with a USB receiver. You can pair your headphones with the video bar for the best experience.
2. The LED indicator will flash red if the power adapter is connected to the data port by mistake.
1. Align the groove of the plug with the pins on the power adapter.
2. Press and turn the plug clockwise to lock.
3. To remove the plug, turn it counterclockwise while pressing the push button.
Note: A general USB wall charger with an output of at least 5V / 2A can also be used to power AnkerWork B600.
When both data and power cables are correctly connected:
- blue means the microphone or camera is in use;
- red means the microphone is muted.
Flashing red means the data and power cables are plugged into the wrong ports.
There are no LED prompts when only the power cable is connected.
- Mute / unmute the microphone by pressing the button on the left side.
- Turn the edge light on / off by pressing the button on the right side. You can also rotate the edge light 135° or wider to turn on the light.
- Slide the brightness bar to adjust brightness.
No, AnkerWork B600 does not currently support Bluetooth.
Please download the software from this link: https://us.ankerwork.com/pages/download-software
1. Update the webcam's firmware by going to Device Switch on the left top corner > Select Device > Device > Inspection Update.
2. View the webcam's FAQ and get in contact with technical support by clicking the question mark.
3. Go to Customizable Mode to adjust the settings according to your preference.
4. Adjust the brightness and color temperature, turn on / off the light, and enable automatic light adjustment.
No, the AnkerWork software does not currently support virtual background settings. However, you can set virtual backgrounds via a third-party software that supports this feature.
The edge light can enhance the brightness of your face in dark environments, making you appear brighter and more professional on video calls.
To turn on the edge light, position it to an angle of 135° or wider. You can also activate the edge light via the AnkerWork software.
Adjust the brightness by sliding the brightness bar on the edge light, or adjust it on the AnkerWork software.
Using the AnkerWork software, you can also adjust the brightness and color temperature or enable automatic light adjustment.
No, AnkerWork B600 only supports 30 fps. The frame rate will be affected by third-party softwares and network bandwidth, but the camera will auto-adjust to ensure the frame rate remains constant.
1. AnkerWork B600 has both auto exposure and auto white balancing functions, which together, automatically correct the brightness according to the environment.
2. The edge light function can be turned on to enhance the brightness of your face in dark situations.
3. The edge light has an auto light adjustment function, which allows the edge light to recognize the brightness level on human faces and automatically adapt.
We recommend turning on the edge light when light conditions are below 30 lux. When using AnkerWork B600 in situations with bright light, the auto exposure and white balancing features are powerful enough to ensure proper brightness is used, but will not make your image overly bright.
When AnkerWork B600 is connected to a third-party conferencing software, the quality of the video image may be affected.
For example, the maximum resolution for Zoom is 720p and 360p for Microsoft Teams. AnkerWork B600 will only display image quality in 720p and 360p,
respectively, despite it being capable of supporting up to 2K resolution.
The quality of the video image can also be influenced by the network bandwidth and processing mechanisms used by third-party software.
Due to the limitations of the USB (UVC) protocol, only one video stream is supported at a time. Make sure that the AnkerWork software is closed when you use AnkerWork B600 with a third-party software.
Improve your microphone's vocal pickup ability by speaking within 3 m of the product and regularly updating the firmware. It is also recommended that you use personal workstations, rather than meeting rooms.
Yes, AnkerWork B600 has two, 2W built-in speakers. Keep the firmware updated to get the best audio results.
No, AnkerWork B600 does not currently support Windows Hello.
For a business quote, please contact us at support@ankerwork.com. Our team will reply in 24 hours.
|
|
|
|
|
|
|
| Model | B600 Video Bar | PowerConf C302 | PowerConf C300 | PowerConf C200 | PowerConf S3 |
| Price | $219.99 | $149.99 | $129.99 | $69.99 | $109.99 |
| Resolution | 2K | 2K | 1080p | 2K | - |
| Light | Auto and manual control for brightness level and color temperature | - | - | - | - |
| Audio Technology | VoiceRadar-Voice Enhancement, AI Noise Cancellation, Echo cancellation | Voice Enhancement and Noise Cancellation | Voice Enhancement and Noise Cancellation | Directional Voice Pick-Up (90°, 180°) and Noise Cancellation | Voice Enhancement and Noise Cancellation |
| Focus Type | AI-Powered Auto Focus | AI-Powered Auto Focus | AI-Powered Auto Focus | Auto Focus | - |
| Smart Function | AI Image, AI Frame, AI Noise Cancellation | AI Image, AI Frame | AI Image, AI Frame | AI Noise Cancellation | - |
| Adjustable Field of View (FoV) | 65°, 78°, 95° | 78°, 90°, 115° | 78°, 90°, 115° | 65°, 78°, 95° | - |
| Privacy Cover | Privacy Cover with Light bar | In Package | In Package | Built in | - |
| Mic | 4 Mics Array with AGC/AEC/ANC | Dual Mic | Dual Mic | Dual Mic | 6 Mics Array with AGC/AEC/ANC |
| Recommended For | Personal Workspace | Personal Workspace and Small Meeting Room | Personal Workspace and Small Meeting Room | Personal Workspace | Flexible Personal Workspace, and Small Meeting Room |
| Video Codec | H264. MJPEG YUV | H264. MJPEG | H264. MJPEG | MJPEG YUV | - |
| Speaker | 2 x 2W | - | - | - | 3W |
